MINI-PEEPER UV SENSOR, 1/2"" FEMALE NPT MTG., 6 FT LEADS, FOR USE WITH R7023C, RA890G, R7290, R7255B, R7249 OR R7259. 0-215F...

UV DETECTOR: Un Mini -40+215F Cond Spud 24 Foot ...

Honeywell  UV Flame Detector 120V 6-Wire Replaces: C7012E1005 C7012E1013 C7012E1054 ...

Honeywell UV Flame Detector 120V 4-Wire ...

HEAT BLOCK FOR F/C7027 UV DETECTOR...

FSG CONTROL INTRPT SPK TRM W/O A-FLOW CHK FIXED PF...

WIRING SUBBASE PANEL MOUNT...

UV MINI -40 TO +215 COND SPUD...

2.5 MIN PURGE CARD FOR 7800 SERIES...

KEYBOARD DISPLAY MOD. FOR 7800 STATUS AND DIAG....

MINI-PEEPER UV SENSOR: 0 to 215 Deg F ,1/2" NPT MTG. 8 FT LEADS...

AUTOMATIC PRIMARY CONTROL, 4 OR 10 SEC PFEP LOCKOUT OR RECYCLE ON FLAME FAILURE, AND 5 LEDS. INCLUDES DUST COVER. 120 V/60 HZ....

Includes ignition transformer For directly ignited burners of unlimited capacity Displays status, unit parameters or flame signal Optical interface for adjustment and diagnostics...

ncludes ignition transformer For pilot and main burners of unlimited capacity allowing independent control for both burners Optical interface for adjustment and diagnostics...

Includes ignition transformer Includes input for OCS signal Displays status, unit parameters or flame signal Optical interface for adjustment and diagnostics...

Flame detection with flame rod or UV detector Micro Amp test points on the face of control Restart or immediate fault lock-out following flame failure...

Flame detection with flame rod or UV detector High cycling frequency Multi burner control in conjunction with flame relay IFW 15T Available with restart or immediate fault lock out...

To detect and signal an existing flame using flame rod or UV detector Used for multi-burner control together with IFS 110IM Burner Control...

High Sensitivity Large ambient temperature range...

Process Firing System Modular burner management system for flame supervision 110/120 V AC or 220/240 V AC For use with UV detector or flame rod...

Flame monitoring (flame rod or UV detector) Multi-burner control with additional flame detectors (option) Settable air valve control (option) PFS..S version gas control only PFS..L version wit...

For flame detection with flame rod or UV For multi-burner control Four independent flame amplifiers Single-electrode operation possible...

Four isolated relays Switching status displayed on front panel For activation of several air butterfly valves...

Output voltage 24 V DC Output load 14 VA Short-circuit proof...

For control of up to 8 burners in 1 or 2 temperature zones External fault signaling Positive logic for pulse outputs...

**Basic model. Provided with an electrical connector for flexible metal conduit (3/8" max.) Protection Controls UV Scanner: High flame signal, Can be mounted in any position, Encapsulated sensor tube ...

30 Sec Purge Card For 7800 Series Honeywell...

Honeywell - FSG Control Intmitt Pilot w/o Airflow Switch Chk...

UV Tube For Honeywell C7012...

FSG Amp for 7800 Rect 3 Sec FFRT Amp-Chk...

Honeywell - FSG Amp For 7800 Rect 2/3 Sec FFRT For C7012A/C...

The Honeywell RM7890A1056 and RM7890B1048 Relay Modules are microprocessor based integrated burner controls for automatically fired, gas only, single burner applications. The RM7890A1056 and RM7...

Honeywell - FSG Amp For 7800 Rect 3 Sec FFRT Self-Chk C7012E...

Honeywell - FSG Control Semi-Auto Programming For Starts/Stop...

Flame Rod 12 In. 1/4 In. Conn...

10 Sec Purge Card For 7800 Series, Honeywell...

FSG Amp For 7800 Rect .8 S FFRT For Flame Rod Or Photocell Green...

Wiring Subbasebur/Wall Conduit Subbase...