|
|
Accessories
Non Adjustable Mounting Fittings
| Code No. |
Sheath O.D.
inches |
Material |
Bore
+0.10,-0.000
inches |
Male
NPT
inches |
Length
inches |
| TH-185-2 |
0.125 |
Brass |
0.130 |
1/8 |
1 |
| TH-185-3 |
0.188 |
Brass |
0.192 |
1/8 |
1 1/8 |
| TH-185-4 |
0.250 |
Brass |
0.256 |
1/8 |
1 3/16 |
| TH-185-5 |
0.250 |
Brass |
0.256 |
1/4 |
1 3/8 |
| TH-185-9 |
0.250 |
Brass |
0.256 |
1/2 |
1 3/4 |
|
| Add suffix SS for non adjustable stainless steel fittings |
Temp Sensor - Accessories - Adjustable Mounting
Fittings
Except for their sealant glands, these fittings are made
entirely of 303 stainless steel. Sealant glands are available in
neoprene, -40 to 200ºF: lava, -300 to 1000ºF: Teflon, -300 to
500ºF. Unless otherwise specified, neoprene sealant glands will
be furnished. Depending on temperature and sheath diameter, the
fittings are pressure rated up to 3,000 psi.
| Single
Threaded |
Sheath
O.D.
inches |
Bore
+0.002
inches |
Male
NPT
inches |
Hex Accross
Flats
inches |
Replacement
Sealant Glands,
Neoprenes |
| Code No. |
Length in. |
| TH-2747-N-063 |
1 1/4 |
0.063 |
0.067 |
1/8 |
1/2 |
TH-279-N-063 |
| TH-2747-N-125 |
1 1/4 |
0.125 |
0.136 |
1/8 |
1/2 |
TH-279-N-125 |
| TH-2747-N-188 |
1 1/4 |
0.188 |
0.193 |
1/8 |
1/2 |
TH-279-N-188 |
| TH-2747-N-250 |
2 7/16 |
0.250 |
0.257 |
1/4 |
7/8 |
TH-279-N-250 |
If Lava or Teflon sealant glands are desired,
substitute L or T in place of the N in the Code No. |
Standard Heads
Standard heads are made of cast iron or aliminum. A plated
chain attaches the gasketed cover to the body. Flats are
provided for tightening. The connector block, held in place with
two screws, can be a single, duplex, or triplex. These heads
have 1, 3/4, or 1/2 inch NPT openings for protecting tubes or
drilled wells. The conduit outlet is 3/4 inch NPT. Maximum
operating temperature is 1000ºF.
Aluminum
Head
Code No. |
Cast Iron
Head
Code No. |
Sensor
Opening (NPT)
inches |
Conduit
Connection
inches |
| H706 |
H709 |
1 |
3/4 |
| H705 |
H708 |
3/4 |
3/4 |
| H704 |
H707 |
1/2 |
3/4 |
|
Connector Blocks
|
| Code No. |
Description |
| H741 |
Single, maximum
operating temperature 1000 F |
| H742 |
Duplex, maximum
operating temperature 1000 F |
| H743 |
Triplex, maximum
operating temperature 1000 F |
|
Explosion Proof Heads
| Code No. |
Sensor
Opening inches |
Conduit
Connection inches |
| XP-11 |
3/4 |
3/4 |
| XP-12 |
1/2 |
3/4 |
|
For use in hazardous locations.
Underwriters' Laboratories Listed Class 1, Groups C, D; Class 2,
Groups E, F, G; Class 3, all Groups.
All XP explosion-proof heads use a TH-615 (six terminal) block.
Also approved for CSA Class1, Groups C and D; Class H, Groups E
and F; and Class III. |
Bayonets
| Code No. |
Description
inches |
L Length inch |
Thread inch |
| TH-295-1 |
|
7/8 |
1/8 |
| TH-295-2 |
Bayonet |
1 |
1/8 |
| TH-295-3 |
Adapter |
1 1/2 |
1/8 |
| TH-295-4 |
|
2 |
1/8 |
|
Industronics Service Company is one of the leading suppliers
of Thermocouples and RTD's in North America.
Our reputation has been built on high quality, fast delivery
, and reliability.
We supply all types of Thermocouples, RTD's, Thermocouple
Wires, Extension Wires, Hardware and Accessories.
|
|
|
|
